HydroACT is a versatile multi-parameter monitoring solution for water treatment processes. Key features include data logging, analog outputs, digital communications, and PID control. The systems are customizable and user friendly.

The Laboratory Charge Analyzer Model LCA-3 is Chemtrac’s newest model lab unit capable of performing automatic titrations to determine optimum coagulant dosage of a raw water sample. The LCA-3 is also capable of determining the amount of pH adjustment chemical, such as lime or caustic, that is needed to maintain optimum pH conditions for coagulation.

The PC5000 Portable Particle Counter is capable of grab sample liquid particle analysis in the lab, as well as online continuous analysis in the field.

We at Chemtrac want our customers to better understand our products. We feel the next best thing to having an on-site demonstration of our analyzers is to be able to see a video demonstration…and become more aware of the product capabilities, and see the ease of set-up and operation.

The Chemtrac SCM2500 Streaming Current Monitor is used to optimize coagulant feed at the City of Hickory North Carolina water treatment plant. The SCM2500 was selected to replace an existing on-line streaming current detector.

The CCA3100 has helped the WTP personnel to optimize their coagulant dosage. Essentially, a jar test can be run in less than 5 minutes. Chemical cost savings, and operator time savings, equals significant $ savings for the municipality.

In October, 2015, the city of Columbia, SC received about 24 inches of rain in 48 hours. Severe flooding occurred. The storm had an impact on the Broad River, and subsequently created challenges for a local water treatment plant.

A Water Treatment Plant in Auburn, AL has the need to monitor free chlorine onsite, as well as at remote locations in the distribution system, where they do not want to have to use reagents. They fist ordered a Chemtrac Reagent-less Free Chlorine analyzer in 2009, and have since purchased several more for other monitoring locations.

The water treatment plant in King,

The Chemtrac SCM2500 Streaming Current Monitor is used to optimize coagulant feed at the City of Hickory North Carolina water treatment plant. The SCM2500 was selected to replace an existing on-line streaming current detector.

The CCA3100 has helped the WTP personnel to optimize their coagulant dosage. Essentially, a jar test can be run in less than 5 minutes. Chemical cost savings, and operator time savings, equals significant $ savings for the municipality.

In October, 2015, the city of Columbia, SC received about 24 inches of rain in 48 hours. Severe flooding occurred. The storm had an impact on the Broad River, and subsequently created challenges for a local water treatment plant.

The water treatment plant in King,

A Water Treatment Plant in Auburn, AL has the need to monitor free chlorine onsite, as well as at remote locations in the distribution system, where they do not want to have to use reagents. They fist ordered a Chemtrac Reagent-less Free Chlorine analyzer in 2009, and have since purchased several more for other monitoring locations.

Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results. The frequency of cleaning will vary from site to site,

This video shows how to adjust, maintain & replace the seals used on the DuraTrac 4 Streaming Current Sensor.  Also, it will show you how to resolve any leaking that may occur from the bleed hole on the probe block.

Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.

The chlorine sensor flow cell is designed to direct the proper sample flow past the membrane in order to ensure accurate and consistent results. This flow cell is also used with a variety of membrane-covered sensors such as free chlorine, total chlorine, chlorine dioxide, chlorite, and ozone.

The chlorine sensor flow cell is designed to direct the proper sample flow past the membrane in order to ensure accurate and consistent results. This flow cell is also used with a variety of membrane-covered sensors such as free chlorine, total chlorine, chlorine dioxide, chlorite, and ozone.

Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results. The frequency of cleaning will vary from site to site,

This video shows how to adjust, maintain & replace the seals used on the DuraTrac 4 Streaming Current Sensor.  Also, it will show you how to resolve any leaking that may occur from the bleed hole on the probe block.

Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.