Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results. The frequency of cleaning will vary from site to site,

This video shows how to adjust, maintain & replace the seals used on the DuraTrac 4 Streaming Current Sensor.  Also, it will show you how to resolve any leaking that may occur from the bleed hole on the probe block.

Periodically the Streaming Current Sensor will become less responsive, and when this happens, the probe and piston should be cleaned. The cleaning alone can restore the sensor back to where it is once again delivering expected performance results.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.

Over time, the probe and the piston in the Duratrac 4 Streaming Current Sensor will become worn, and subsequently less responsive. When this happens, cleaning the probe and piston surfaces may not be enough to improve the response to a degree of satisfaction.

The chlorine sensor flow cell is designed to direct the proper sample flow past the membrane in order to ensure accurate and consistent results. This flow cell is also used with a variety of membrane-covered sensors such as free chlorine, total chlorine, chlorine dioxide, chlorite, and ozone.