South Carolina Water Treatment Plant benefits financially from Chemtrac Training
A water treatment plant in Batesburg-Leesville, SC sponsored a Chemtrac Technical Training Program on April 10, 2014, for all operators
A water treatment plant in Batesburg-Leesville, SC sponsored a Chemtrac Technical Training Program on April 10, 2014, for all operators
Earlier this month, Chemtrac exhibited at the 23rd Annual Southwest Chemistry Workshop (SWCW), at the Wyndham Bayside Hotel in San Diego, CA. There were 160 attendees, including approximately 100 chemistry and engineering related personnel from over 20 different power plants.
At the Georgia Association of Water Professionals (GAWP) Annual Conference & Expo in Savannah, GA, July 20 -22, Chemtrac will exhibit a new line of automatic controllers for optimizing coagulation and filtration.
Joe Zimmerman, who leads Chemtrac’s sales efforts in the Power Industry, was recently invited to speak at a Condensate Polishing Conference in Xi’an, China. The meeting was held on April 24th and 25th and was sponsored by the Thermal Power Research Institute (TPRI).
A WTP in North Carolina recently reduced their coagulant feed from 30 ppm to less than 10 ppm after purchasing and installing a Streaming Current Monitor (SCM) and Coagulant Charge Analyzer (CCA). Prior to their purchase, the plant ran numerous jar tests to determine optimum coagulant dose but ultimately based their target dosage largely on plant history.
The Georgia Association of Water Professionals 2014 Spring Conference & Expo is scheduled for April 15 & 16, in Columbus, GA.
Working closely with a major municipality in the southeast, Chemtrac, Inc. compared their new line of coagulation control instrumentation against their tried and proven Streaming Current Controller (which has been in use at this specific plant for the past couple of years).
DPD colorimetric measurement is highly regarded among municipalities as the preferred method for on-line chlorine analysis.
Chemtrac recently hosted their 2014 International Sales Meeting at the Crowne Plaza Hotel in Atlanta. In attendance were 45 Manufacturer’s Representatives